Radio Parameters; Show; Frequency Scanning; Figure 4-11: Radio - Show Page - Alvarion BreezeMAX PRO 5000 CPE Product Manual

Chapter 4 - Operation
4.8

Radio Parameters

The Radio Parameters page includes the following options:

Show



Frequency Scanning


Antenna Selection

4.8.1 Show
The Show page displays the Frequency and Bandwidth selected by the scanning
mechanism.
4.8.2 Frequency Scanning
The Frequency Scanning page enables viewing and updating the set of frequencies
to be used during the scanning process. The list of frequencies that participate in
the scanning process includes a set of frequencies belonging to the scanning
range and/or a set of up to 10 discrete frequencies.
The scanning range is defined by Start Rx Frequency, End Rx Frequency,
Scanning Main Step and Intermediate Steps. The set of frequencies to be scanned
is defined as follows:
The "Main Frequencies" are defined by the Start Frequency and Main Step, using
the formula F(N) =Start Frequency + N*Main Step; 
F(1) = Start Frequency + Main Step, F(2) = Start Frequency +2*Main Step,...
End Frequency is the upper limit.
BreezeMAX PRO 5000 CPE

Figure 4-11: Radio - Show Page

67
Radio Parameters
Product Manual