11.1.1 General Online Commands - Leuze electronic BCL 8 Series Original Operating Instructions

11.1.1 General online commands

Software version number
Command
Description
Parameter
Acknowledg-
ment
NOTE
You can use this command to check whether the communication to the connected
computer is functional. If you do not receive an acknowledgment, please check the inter-
face connections or the protocol.
Software reset
Command
Description
Parameter
Acknowledg-
ment
Leuze electronic
Requests device version information
None
Ex.: 'BCL 8 V 01.10 05.10.2006'
The device type appears in the first line followed by the device's version
number and date. The data which is actually displayed may vary from the
values given here.
Carries out a software reset. The device is restarted and reinitialized, leav-
ing it in the same state as when the supply voltage is switched on.
No
'S' (start signal)
'V'
'H'
BCL 8
Online commands
59