11.1.1 General 'Online' Commands - Leuze electronic BCL 8 Series Manual

11.1.1 General 'online' commands

Software version number
Command
Description
Parameter
Acknowledge-
ment
Notice!
You can use this command to check whether the communication to the connected computer
is functional. If you do not receive an acknowledgement, please check the interface connec-
tions or the protocol.
Software reset
Command
Description
Parameter
Acknowledge-
ment
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Requests device version information
None
Ex.: 'BCL 8 V 01.10 05.10.2006'
The device type appears in the first line followed by the device's version
number and date. The data which is actually displayed may vary from the
values given here.
Carries out a software reset. The device is restarted and reinitialised, leav-
ing it in the same state as when the supply voltage is switched on.
None
'S' (start signal)
BCL 8
Online commands
'V'
'H'
55