Description; Sitrans Ws300 Speed Sensor Overview - Siemens SITRANS WS300 Operating Instructions Manual

Speed sensors

Hide thumbs Also See for SITRANS WS300:

Table of Contents

Description

2.1

SITRANS WS300 speed sensor is a low- to high-resolution shaft driven speed sensor. It measures

the shaft's rotation by sending pulses to the integrator. The WS300 is certified for use in

hazardous and non-hazardous locations.

This small, light-weight speed sensor features:

• Optional resolutions for accurate measurement over a range of belt speeds

• Long bearing life

• Corrosion resistance

Pulses are generated for each rotation of the WS300 shaft. These pulses are typically fed into a

Milltronics belt scale integrator. The integrator interprets the pulses and uses them in the

calculation of belt speed, flow rate, and material totalization.

The WS300 works with the following integrators:

• Milltronics BW100

• Milltronics BW500

• SIWAREX FTC

• SIWAREX WP241

• SIWAREX WT241

• Competitive integrators - consult your local Siemens representative

The WS300 sensors can also be used with older model Siemens integrators:

• Compuscale

• Compuscale II

• Compuscale IIA

• Compuscale III

• Compu-M

For further information about Siemens products, go to

www.siemens.com/processautomation (www.siemens.com/processautomation)

SITRANS WS300

Operating Instructions, 08/2020, A5E45050935-AB

Table of Contents