Table 8-1 List Of Parameters For The Serving Cell; Table 8-2 List Of Parameters For Dedicated Channels - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

Table 8-1 List of parameters for the serving cell

Parameter Description
chann
rs
dBm
MCC
MNC
LAC
cell
NCC
BCC
PWR
PXLev
C1

Table 8-2 List of parameters for dedicated channels

Parameter Description
chann
TS
dBm
timAdv
PWR
dBm
Q
ChMod
Parameter values set for the ME in different states
Issue 02 (2010-11-23)
ARFCN (Absolute Frequency Channel Number) of the BCCH carrier
RSSI value (0–63) (RSSI= Received signal strength indication)
Receive signal strength of the BCCH (dBm)
Country code (first part of the PLMN code)
Network code (second part of the PLMN code)
Location area code
Cell ID
Network color code, which is used to differentiate PLMN subnets
Base station color code, which is used to differentiate intra-frequency
cells
Maximum power level of the RACH (dBm)
Minimum receive signal level allowed for registration (dBm)
Base station selection coefficient
Absolute Frequency Channel Number (ARFCN) of the Traffic Channel
(TCH)
Note:
When <chann>=h, it indicates frequency hopping.
Sequence number of time slot
Receive signal strength level of the BCCH (dBm)
Timing advance value (bits)
Power level
Receive signal strength level of the TCH (dBm)
Receive signal quality (0–7)
Channel mode (--: Signaling, S_HR: Half rate, S_FR: Full rate, S_EFR:
Enhanced
Full Rate, A_HR: AMR Half rate, A_FR: AMR Full rate)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Network Services
87