Reading The Gprs Event Reporting Mode; Setting The Gprs Event Reporting Mode - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

9.3.2 Reading the GPRS Event Reporting Mode

Read
command
Function
Response

9.3.3 Setting the GPRS Event Reporting Mode

Write
command
Function
Response
Unsolicited event reporting
URC 1
+CGEV: REJECT <PDP_type>, <PDP_addr>
The MT disables the reporting of +CRING to the TE. The request for activating the
PDP context on the network is automatically rejected.
URC 2
+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
The network requests for re-activating the PDP context. The <cid> parameter is used
to re-activate the PDP context.
URC 3
+CGEV: NW DEACT <PDP_type>, <PDP_addr>, [<cid>]
The network requests for deactivating the PDP context. The <cid> parameter is used
to activate the PDP context.
URC 4
+CGEV: MT DEACT <PDP_type>, <PDP_addr>, [<cid>]
Issue 02 (2010-11-23)
AT+CGEREP?
Reads the GPRS event reporting mode.
In case of successful execution: <CR><LF>+CGEREP:
<mode>,<bfr><CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
AT+CGEREP=[<mode>[,<bfr>]]
Sets the GPRS event reporting mode.
In case of successful execution: <CR><LF> OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Data Services
115