Reading The Current Cbm Type; Setting The Current Cbm Type; Examples - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

11.11.2 Reading the Current CBM Type

Read
command
Function
Response
Parameter description
<mids>: string, which indicates the combination of all CBM identification codes. This
parameter is stored in SIM card. For example, "0,1,5,320-478,922". A maximum of
fifteen values are supported
<dcss>: string, which indicates the combination of all CBM data coding schemes. The
default value is 0-255. For example, "0-3,5". A maximum of five values are
supported Setting the Current CBM Type

11.11.3 Setting the Current CBM Type

Write
command
Function
Response
Note:

11.11.4 Examples

Example:
Query the current CBM information.
Issue 02 (2010-11-23)
AT+CSCB?
Reads the current CBM type.
In case of successful execution:
<CR><LF>+CSCB: <mode>,<mids>,<dcss><CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
AT++CSCB=[<mode>[,<mids>[,<dcss>]]]
Sets the current CBM type.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
If no parameters of this command are set, AT+CSCB= considers the previously set values
valid for various parameters.
The settings specified by mids and dcss are added to or removed from the previous
settings.
at+cscb=0 deletes all mids and dcss settings that have been configured.
at+cscb=1 keeps mids unchanged and sets dcss to the default value.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Short Messages
177