Commands For Network Services; At+Copn - Command For Querying The Operator Name; Checking Whether This Command Is Supported - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
8
This chapter describes the AT commands that allow users to query and configure the
operator information.
8.1 AT+COPN - Command for Querying the Operator
Name
The AT+COPN command queries the operator name.

8.1.1 Checking Whether This Command Is Supported

Test
command
Function
Response
Issue 02 (2010-11-23)

Commands for Network Services

AT+COPN=?
Checks whether this command is supported.
In case of available command: <CR><LF>OK<CR><LF>
In case of unavailable command: <CR><LF>ERROR<CR><LF>
In case of an error related to the MT during command execution:
<CR><LF>+CME ERROR: <err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Network Services
74