Commands For Short Messages; At+Cmgd - Command For Deleting Short Messages; Checking The Parameter Range Supported By The Command - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
11
This chapter describes the AT commands related to short messages. Currently, the
MG323 does not support short messages in text mode.

11.1 AT+CMGD - Command for Deleting Short Messages

The AT+CMGD command deletes the short messages that are stored on the
preferred memory<mem1> (for details, see AT+CPMS).

11.1.1 Checking the Parameter Range Supported by the Command

Test
command
Function
Response
Issue 02 (2010-11-23)

Commands for Short Messages

AT+CMGD=?
Checks the supported indexes of short messages and deletes the
parameters of short message type.
In case of successful execution:
<CR><LF>+CMGD: (list of supported <index>s),(list of supported
<delflag>s)<CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MS: <CR><LF>+CMS ERROR:
<err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Short Messages
156