Ata - Command For Answering A Call Or Data Services; Ats0- Commands For Setting The Automatic Answer Data Services; Reading The Settings Of The Automatic Answer Data Services - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

7.5 ATA - Command for Answering a Call or Data Services

The ATA command answers a call or CSD data services
Execution
command
Function
Response
Note:
7.6 ATS0- Commands for Setting the Automatic Answer
Data Services
The ATS0 command sets the automatic answer data service..

7.6.1 Reading the Settings of the Automatic Answer Data Services

Read
command
Function
Response
Parameter description
Issue 02 (2010-11-23)
3: hangs up all GPRS data services on the current channel.
4: hangs up all activated CS domain call (including voice and CSD data services)
on the current channel (the CS data services in waiting state are not hung up).
5: hangs up the CS domain call in waiting state (including voice and CSD data
services) GPRS data services on the current channel (the CS data services in
activated state are not hung up).
ATA
Answers a call or CSD data services.
In case of successful in establishing a cal:l
<CR><LF>OK<CR><LF>
In case of successful in establishing CSD data services:
<CR><LF>CONNECT[<text>]<CR><LF>
In case of failed link
<CR><LF>NO CARRIER<CR><LF>
During the command execution process, entering a character interrupts command
execution and returns OK.
The ATA command can be used to receive the PDP context activation request from the
network side, and unsolicitedly report URC"RING: GPRS" or "+CRING: GPRS".
ATS0?
Reads the settings of the automatic answering data services.
<CR><LF><n><CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Call Control
establishment:
61