Table of Contents
Advertisement
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
13.3 AT+CPBS - Command for Selecting the Phone Book
Memory
The AT+CPBS command selects the phone book memory. After the MT restarts, the
MT restores the initial setting to "SM". Other commands related to the phone book
perform operations by using the phone book memory that is selected by this
command.
13.3.1 Checking the Value Range Supported by the +CPBS
Command
Test
command
Function
Response
Parameter description
<storage>: type of the phone book memory. The following table describes the value
options of <storage>.
Table 13-1 Value options of <storage>
Value
SM
LD (not supported
currently)
EN (not supported
currently)
FD (not supported
currently)
ON (not supported
currently)
RC (not supported
currently)
MC (not supported
current)
Issue 02 (2010-11-23)
AT+CPBS=?
Checks the optional items of the phone book memory.
In case of successful execution:
<CR><LF>+CPBS: (list of supported
<storage>s)<CR><LF><CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR:<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Description
Phone book on the SIM card (default value)
Dialed phone number on the MT
Emergency call number on the SIM card (or MT)
Fixed dial number on the SIM card. The PIN2 code must be
verified when the option is used.
Local phone number on the SIM card
List of recent caller IDs on the MT
List of missing calls of the MT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for the Phone Book
188
Advertisement
Table of Contents
