Querying The List Of Preferred Operators; Setting The List Of Preferred Operators; Examples - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

8.11.2 Querying the List of Preferred Operators

Read
command
Function
Response
Parameter description
<operator>: indicates an operator name in numeric format.

8.11.3 Setting the List of Preferred Operators

Write
command
Function
Response
Note:
You can set <format> in AT+CPOL=,<format>.

8.11.4 Examples

Example:
Add a preferred operator.
AT+CPOL=1,2,46000
OK
Issue 02 (2010-11-23)
AT+CPOL?
Queries the list of preferred operators.
In case of successful execution:
<CR><LF>[+CPOL:<index>,<format>,<operator>]<CR><LF>
<CR><LF> [+CPOL:...]<CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT during command execution:
<CR><LF>+CME ERROR: <err><CR><LF>
AT+CPOL=<index>[,<format>,<operator>]
Sets the list of preferred operators.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT during command execution:
<CR><LF>+CME ERROR: <err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Network Services
104