HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
2.13.2 Reading the Settings for Configuration Items
Read
command
Function
Response
2.13.3 Setting Configuration Items
Write
command
Function
Response
2.14 ^SYSSTART – Command for Unsolicitedly Reporting
Module Startup
This command indicates that the module is started, and can be operated.
If the adaptive baud rate is set (that is, AT+IPR=0), this command is not reported.
URC
Issue 02 (2010-11-23)
AT^SCFG?
Reads the settings for configuration items.
<CR><LF>^SCFG: <str>s, <value>[,<value>[,...]] <CR><LF>
[<CR><LF>^SCFG: <str>s, <value>[,<value>[,...]] <CR><LF>
[...]]
<CR><LF>OK<CR><LF>
AT^SCFG=<str>[,<value>]
Sets configuration items.
In case of successful execution:
<CR><LF>^SCFG: <str>, <value><CR><LF>
<CR><LF>OK<CR><LF>
In case of an error: <CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
<CR><LF>^SYSSTART<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Configuration
26