Querying The Supported Muting Settings For The Microphone; Reading The Curent Muting Settings Of The Microphone - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
15.5.1 Querying the Supported Muting Settings for the
Microphone
Test
command
Function
Response
Parameter describtion
<n>: integer

15.5.2 Reading the Curent Muting Settings of the Microphone

Read
command
Function
Response
Note:
This command can be used only during a call.
Issue 02 (2010-11-23)
AT+CMUT=?
Queries the supported muting settings for the microphone.
<CR><LF>+CMUT: (list of supported <n>s)<CR><LF>
<CR><LF>OK<CR><LF>
0 (default value): unmutes the microphone.
1: mutes the microphone.
AT+CMUT?
Reads the current muting settings of the microphone.
In case of successful execution:
<CR><LF>+CMUT: <n><CR><LF>
<CR><LF>OK<CR><LF>
In case of an error: <CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF> +CME
ERROR: <err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Audio Control
202