HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
Display the information about the connection profile whose value of conProfileId is 0.
AT^SICI=0
^SICI: 0,2,1,192.168.50.100
OK
10.3 AT^SISS - Command for Creating the Service Profile
The AT^SISS command sets the service profile.
10.3.1 Checking Whether This Command Is Available
Test
command
Function
Response
10.3.2 Reading the Status of the Service Profile
Read
command
Function
Response
Parameter description
<srvProfileId>: numeric parameter, which identifies the service profile. Value range:
0–9.
<srvParmTag>: string parameter. Currently, only the socket service is supported. The
following table lists the values of <srvParmTag>.
Issue 02 (2010-11-23)
AT^SISS=?
Checks whether the AT^SISS command is supported.
In case of available command: <CR><LF>OK<CR><LF>
In case of unavailable command: <CR><LF>ERROR<CR><LF>
AT^SISS?
Reads the status of the defined service profile.
In case of successful execution:
<CR><LF>^SISS: <srvProfileId>,<srvParmTag>,<srvParmValue>
<CR><LF>^SISS: <srvProfileId>,<srvParmTag>,<srvParmValue>
<CR><LF>...<CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>CME ERROR:
<err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Internet Services
141