Querying The Supported Settings For Service Reporting; Reading The Current Settings For Service Reporting; Table 7-1 Values Of <Serv - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

7.13.1 Querying the Supported Settings for Service Reporting

Test
command
Function
Response
Parameter description
<mode>: integer.
+CR: <serv>
<serv>: string. Table 7-1 describes the values of <serv>.
Table 7-1 Values of <serv>
Value
"REL ASYNC"
"GPRS"

7.13.2 Reading the Current Settings for Service Reporting

Read
command
Function
Response
Issue 02 (2010-11-23)
AT+CR=?
Queries the supported settings for service reporting.
In case of successful execution:
<CR><LF>+CR: (list of supported <mode>s) <CR><LF>
<CR><LF>OK<CR><LF>
In case of an error: <CR><LF>ERROR<CR><LF>
0 (default value): disables service reporting.
1: enables service reporting. The TA reports the intermediate result code after
determining the rate and service quality in connection negotiation and before
reporting error settings or data compression and other result codes such as
CONNECT.
Description
Asynchronous and non-transparent transmission
Request for activating the PDP context on the GPRS network
AT+CR?
Reads the current settings for service reporting.
In case of successful execution:
<CR><LF>+CR: <mode><CR><LF>
<CR><LF>OK<CR><LF>
In case of an error: <CR><LF>ERROR<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Call Control
68