At^sisc - Command For Stopping Internet Services; Checking Whether This Command Is Available; Stopping A Specified Internet Service; Examples - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
Example 2:
Query the enabling status of all services.
AT^SISO?
^SISO: 0,Socket,3,3,0,0,192.168.50.25:8000,0.0.0.0
OK

10.6 AT^SISC - Command for Stopping Internet Services

This command stops a specified Internet service.

10.6.1 Checking Whether This Command Is Available

Test
command
Function
Response

10.6.2 Stopping a Specified Internet Service

Write
command
Function
Response
Parameter description
<srvProfileId>: numeric parameter, which indicates the identification of the internet
service profile. Value range: 0–9.

10.6.3 Examples

Example 1:
Issue 02 (2010-11-23)
AT^SISC=?
Checks whether this command is available.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>CME ERROR:
<err><CR><LF>
AT^SISC=<svrProfileId>
Stops the service whose ID is <svrProfileId>.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>CME ERROR:
<err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Internet Services
149