HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
8.1.2 Reading the List of Operators
Execution
command
Function
Response
Parameter description
<numericn>: indicates an operator in numeric format.
<alphan>: indicates an operator in long string format.
8.1.3 Examples
Example 1:
Query the command status.
AT+COPN=?
OK
Example 2:
Query all the operator information.
AT+COPN
+COPN: "36320", "DIGICEL"
<list of operator information, which is omitted due to excessive length>
OK
8.2 AT+COPS - Command for Selecting Operators
The AT+COPS command registers a network and queries the currently registered
network status and network selection mode.
Issue 02 (2010-11-23)
AT+COPN
Reads the list of operators.
In case of successful execution:
<CR><LF>+COPN:<numericn>,<alphan><CR><LF>
[<CR><LF>+COPN: ...(list of operators)<CR><LF>]
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT during command execution:
<CR><LF>+CME ERROR: <err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Network Services
The command is available.
75