Setting Unsolicitedly Answering Data Services; Ats7 - Command For Setting The Duration To Be Waited For Completion Of Connection Establishment; Reading The Set Waiting Duration Request - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
<n>: Integer
0: automatic answer mode is disabled.
1~255: number of rings before automatically answering a call.

7.6.2 Setting Unsolicitedly Answering Data Services

Write
command
Function
Response
Note:
If <n> is set to a too great value, the calling party may hang up before the call is automatically
answered.
7.7 ATS7 - Command for Setting the Duration to Be
Waited for Completion of Connection Establishment
The ATS7 command sets the duration to be waited by the TA for the completion of
connection establishment when originating or receiving a data call. Generally, this
duration is calculated as the duration to be waited for bearer signals. If failing to
receive bearer signals within a specified duration, the TA hangs up the current data
call.

7.7.1 Reading the Set Waiting Duration Request

Read
command
Function
Response
Parameter description
<n>: integer, which indicates the waiting duration in seconds. The default value is 60.
000–255
Issue 02 (2010-11-23)
ATS0=<n>
Sets unsolicitedly answering data services.
In case of successful execution:：<CR><LF>OK<CR><LF>
In case of an error:：<CR><LF>ERROR<CR><LF>
ATS7?
Reads the set waiting duration.
<CR><LF><n><CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Call Control
62