Examples; At+Cscb - Command For Selecting The Type Of Cell Messages; Checking The Parameter Range Supported By The Command - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

11.10.4 Examples

Example 1:
Set the number of the SMSC.
AT+CSCA=1380063859
OK
Example 2:
Query the status of the SMSC.
AT+CSCA?
+CSCA: "1380063859", "129"
OK
11.11 AT+CSCB - Command for Selecting the Type of Cell
Messages
The AT+CSCB command selects the type of cell messages.
11.11.1 Checking the Parameter Range Supported by the
Command
Test
command
Function
Response
Parameter description
<mode>: numeric, which indicates the message type.
Issue 02 (2010-11-23)
AT+CSCB=?
Checks the parameter range supported by the command.
In case of successful execution:
<CR><LF>+CSCB: (list of supported <mode>s) <CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
0: adds the message type that is defined by <mids><dcss> from the previous
settings.
1: removes the message type that is defined by <mids><dcss> from the
previous settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Short Messages
176