Examples; At+Cpwd - Command For Modifying The Password - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
<passwd>: string, which can be or may not be placed inside quotation marks. This
parameter corresponds to the password of <fac> and can be modified through
+CPWD. When mode is set to 0 or 1, this parameter is mandatory. When mode is
set to 2, no password is required. The characters inside the string must be obtained
from '0'–'9'. Otherwise, an error is returned directly.
<class>: integer, which indicates the service type.

5.2.3 Examples

Example 1:
Lock the SIM card.
AT+CLCK="SC",1,"1234"
OK
Example 2:
Unlock the SIM card.
AT+CLCK="SC",0,"1234"
OK
Example 3:
Query the locking status of the SIM card.
AT+CLCK="SC",2
+CLCK: 0
OK

5.3 AT+CPWD - Command for Modifying the Password

The AT+CPWD command modifies the password.
Issue 02 (2010-11-23)
1: voice call (not supported currently)
2: data
4: fax (not supported currently)
7: voice+data+fax (not supported currently)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Security Control
47