Reading The Current Memory Of The Phone Book; Setting The Memory Type Of The Phone Book; Examples - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

13.3.2 Reading the Current Memory of the Phone Book

Read
command
Function
Response
Parameter description
<used>: integer value, which indicates the number of used entries in the currently
selected memory.
<total>: integer value, which indicates the maximum number of entries in the
currently selected memory.

13.3.3 Setting the Memory Type of the Phone Book

Write
command
Function
Response

13.3.4 Examples

Example 1:
AT+CPBS=?
+CPBS: ("FD","SM","ON","LD","MC","RC","EN")
OK
Example 2:
Issue 02 (2010-11-23)
AT+CPBS?
Reads the current memory of the phone book.
In case of successful execution:
<CR><LF>+CPBS:
<storage>[,<used>,<total>]<CR><LF><CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
AT+CPBS=<storage>
Sets the memory type of the phone book.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for the Phone Book
189