At&W - Command For Storing The Current Configuration; Table 2-3 List Of Commands And Parameters That Can Be Stored By At&W - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
2.3 AT&W - Command for Storing the Current
Configuration
The AT&W command stores the current configuration of the module in the profile.
The ATZ command restores the settings. When the AT&W command is used to store
the current configuration information, if you restart the module without modifying the
configuration information, the configuration of the module after restart is the
configuration information stored by using the AT&W command.
Execution
command
Function
Response
Parameter description
<value>: integer; AT&W is equivalent to AT&W0.
0 (default value): sequence number of the profile.
Table 2-3 List of commands and parameters that can be stored by AT&W
AT Commands
Commands for configuration
ATQ
ATV
ATE
AT+CMEE
Commands for serial port control
AT\Q
AT&C
AT&D
AT&S
ATE
Commands for network services
AT+COPS
AT+CREG
Issue 02 (2010-11-23)
AT&W[<value>]
Stores the current parameter configuration.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error: <CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CMS
ERROR: <err><CR><LF>
<n>
<value>
<value>
<errMode>
<n>
<value>
<value>
<value>
<value>
<format>
<n>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Configuration
12