At^siso - Command For Starting Internet Services; Checking Whether This Command Is Available; Querying The Open Status Of All Services - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

10.5 AT^SISO - Command for Starting Internet Services

This command starts a specified Internet service.

10.5.1 Checking Whether This Command Is Available

Test
command
Function
Response

10.5.2 Querying the Open Status of All Services

Read
command
Function
Response
Parameter description
<srvProfileId>: numeric parameter, which indicates the ID of the internet service
profile. 0–9
<srvType>: service type
Issue 02 (2010-11-23)
AT^SISO=?
Returns the result of whether this command is available.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>CME ERROR:
<err><CR><LF>
AT^SISO?
Reads the open status of all services.
In case of successful execution:
<CR><LF>^SISO:
<srvProfileId>,<srvType>,<srvState>,<socketState>,<rxCount>,
<txCount>,<locAddr>,<remAddr>
[<CR><LF>^SISO: ...]] <CR><LF>
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>CME ERROR:
<err><CR><LF>
Socket
Ftp (not supported currently)
Http (not supported currently)
Smtp (not supported currently)
Pop3 (not supported currently)
none
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Internet Services
147