Atq - Command For Controlling The Return Of Execution Results - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
AT Commands
Commands for call control
AT+CBST
AT+CRLP
ATS7
AT+CR
AT+CRC
Commands for short messages
AT+CMGF
AT+CNMI
AT+CSMS
Other commands
ATS3
ATS4
ATS5
2.4 ATQ - Command for Controlling the Return of
Execution Results
The ATQ command controls whether to return the execution results to the TE.
Execution
command
Function
Response
Parameter description
<n>: integer; ATQ is equivalent to ATQ0.
Issue 02 (2010-11-23)
<speed>, <name>, <ce>
<iws>, <mws>, <T1>, <N2>
<n>
<mode>
<mode>
<mode>
<mode>,<mt>, <bm>, <ds>
<service>
<n>
<n>
<n>
ATQ[<n>]
Controls the return of execution results.
In case of <n>=0: <CR><LF>OK<CR><LF>
In case of <n>=1, no result is returned.
0 (default value): The DCE returns the execution results.
1: The DCE does not return the execution results.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Configuration
13