Other Commands; A/ - Command For Executing The Previous Command Again; Execution Command; Examples - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
This chapter describes auxiliary commands that are not covered by the preceding
chapters.
16.1 A/ - Command for Executing the Previous Command
Again
The A/ command executes the previous command again.

16.1.1 Execution Command

Execution command
Function
Response

16.1.2 Examples

Example:
Execute the previous command.
AT+CREG?
+CREG: 0,1
OK
A/
+CREG: 0,1
OK
Issue 02 (2010-11-23)
16
A/
Executes the previous command.
Same as the output result of the previous command.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Other Commands

Other Commands
204