Setting The Terminal Error Reporting Mode; At+Cscs - Command For Setting The Te Character Set; Querying The Character Set Supported By The Te - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

2.11.3 Setting the Terminal Error Reporting Mode

Write
command
Function
Response
Note:
If the error cause is unrelated to the MT, common ERROR is returned.
2.12 AT+CSCS - Command for Setting the TE Character
Set

2.12.1 Querying the Character Set Supported by the TE

Test
command
Function
Response
Parameter description
<chset>: string, which indicates the character set of the MS.
Issue 02 (2010-11-23)
AT+CMEE=<n>
Sets the mode of reporting errors related to the ME by the module.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error: <CR><LF>ERROR<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
AT+CSCS=?
Queries the character set supported by the TE.
<CR><LF>+CSCS: (list of supported <chset>s) <CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Configuration
22