Cbm - Command For Unsolicitedly Reporting A Cell Sm; Cds - Command For Unsolicitedly Reporting A New Sm Status Report - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
<pdu>: PDU. For details, see the AT+CMGL command
11.15 +CBM – Command for Unsolicitedly Reporting a
Cell SM
The +CBM command is used to indicate that a new cell SM is received.
URC
Parameter description
<length>: integer, which indicates the number of bytes in the TPDU.
<pdu>: PDU. For details, see the AT+CMGL command.
11.16 +CDS – Command for Unsolicitedly Reporting a
New SM Status Report
The +CDS command is used to indicate that a new SM status report is received.
URC
Parameter description
<length>: integer, which indicates the number of bytes in the TPDU.
<pdu>: PDU. For details, see the AT+CMGL command.
Issue 02 (2010-11-23)
When the value of <bm> in the AT+CNMI command is 2 and the PDU
mode is adopted:
<CR><LF>+CBM: <length><CR><LF><pdu>
When the value of <ds> in the AT+CNMI command is 2 and the PDU
mode is adopted:
<CR><LF>+CMT: <length><CR><LF><pdu>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Short Messages
181