Examples - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
Write
command
Function
Response
Parameter description
<oldpwd>,<newpwd>:
length of password is specified by the <pwdlength> parameter; the characters inside
the string must be obtained from '0'–'9'. Otherwise, an error is returned directly.

5.3.3 Examples

Example:
Run AT+CPWD to modify the PIN code.
AT+CLCK="SC",2
card.
+CLCK:0
OK
AT+CLCK="SC",1,"1234"
state.
OK
AT+CPWD="SC","1234","1111"
OK
Issue 02 (2010-11-23)
AT+CPWD=<fac>,<oldpwd>,<newpwd>
Modifies the password (such as PIN) that corresponds to the locking
function of the device.
In case of successful execution: <CR><LF>OK<CR><LF>
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
old password and new password; string; the maximum
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Security Control
Query the locking status of the SIM
Set the SIM card to the PIN locking
Modify the PIN code.
49