HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
This chapter describes the AT commands that allow external applications to configure
the basic data of the module.
2.1 AT&F - Command for Restoring Factory Settings
The AT&F command restores the module to factory settings.
Execution
command
Function
Response
Parameter description
<value>: integer; AT&F is equivalent to AT&F0.
0: restores the current settings for AT commands to the factory settings.
Table 2-1 List of factory settings for AT&F
Factory Settings for AT Commands
Commands for configuration
ATQ
ATV
AT+CFUN
AT+CMEE
AT+CSCS
AT^SCFG
Commands for status control
Issue 02 (2010-11-23)
2
Commands for Configuration
AT&F[<value>]
Restores the related parameters to factory settings.
<CR><LF>OK<CR><LF>
<n>=0
<value>=1
<fun>=1
<errMode>=0
<chset>="GSM"
<tcpIrt>="3", <tcpMr>="10", <tcpOt>="6000", <tcpWithUrc>="on"
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Configuration
9