At^scfg - Extended Command For Setting Configuration Items; Querying The Configuration Items That Can Be Set By The Module; Table 2-9 List Of Configurable Items - Huawei MG323 At Command Interface Specification

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
2.13 AT^SCFG - Extended Command for Setting
Configuration Items
2.13.1 Querying the Configuration Items That Can Be Set by the
Module
Test
command
Function
Response
Parameter description
<str>: string, which indicates the configurable items. For details, see Table 2-9.
<value>: indicates the configurable parameter values. For details, see Table 2-9.

Table 2-9 List of configurable items

<str>
"PowerSaver/Mode9/Timeout"
"Tcp/IRT"（which is not supported currently.）
"Tcp/MR"
"Tcp/OT"
"Tcp/WithURCs"
"URC/Datamode/Ringline"
"URC/Ringline"
<psm9to>: string, which indicates the duration of wakeup state in power saving mode
9 (the AT+CFUN command). The default value is 20, that is, 2s. The value range is
as follows:
5... 36000
<tcpIrt>: string, which indicates the waiting time for initial re-connection (IRT). The
default value is 3.
1...60
re-connection in the stage of setting up initial TCP/IP connection.
Issue 02 (2010-11-23)
AT^SCFG=?
Queries the configuration items that can be set by the module.
<CR><LF>^SCFG: <str>s, (list of supported <value>s)<CR><LF>
[<CR><LF>^SCFG: <str>s, (list of supported <value>s)<CR><LF>
[...]]
<CR><LF>OK<CR><LF>
The value 10 indicates 1s. The time interval is 100 ms.
This parameter sets the waiting time (in seconds) before starting the initial
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Configuration
<value>
<psm9to>
<tcpIrt>
<tcpMr>
<tcpOt>
<tcpWithUrc>
<udri>
<uri>
24