Table of Contents
Advertisement
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification
8.14.1 Checking Whether This Command Is Available
Test
command
Function
Response
8.14.2 Querying the MSISDN Related to Subscribers
Execution
command
Function
Response
Parameter description
<alphax>: subscriber name of the local phone number. The subscriber name is a
string consisting of digits and characters and the used character set is the value set
by +CSCS.
<numberx>: phone number string type that is defined according to the <typex>
format and consists of digits 0–9 and the + symbol.
<typex>: type of the local phone number. An 8-digit address type in integer format.
When <numberx> contains the + symbol, the value of <typex> is 145, indicating an
international phone number. When <numberx> does not contain the + symbol, the
value of <typex> is 129, indicating a phone number of the home country.
<speed>: not supported currently.
<service>: services related to the phone number, which are not supported currently.
Issue 02 (2010-11-23)
AT+CNUM=?
Checks whether this command is available.
In case of available command: <CR><LF>OK<CR><LF>
In case of unavailable command: <CR><LF>ERROR<CR><LF>
AT+CNUM
Reads the mobile station international ISDN number (MSISDN) related to
subscribers.
In case of successful execution:
[+CNUM: [<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]]
[<CR><LF>+CNUM:
[<alpha2>],<number2>,<type2>[,<speed>,<service>
[,<itc>]][...]]<CR><LF>]
<CR><LF>OK<CR><LF>
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
In case of an error related to the MT during command execution:
<CR><LF>+CME ERROR: <err><CR><LF>
0: adaptive baud rate
7: 9600 bit/s (V.32)
71: 9600 bit/s (V.110)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commands for Network Services
108
Advertisement
Table of Contents
