Fourier DataNet User Manual page 96

Once the network has been selected the following screen will
be displayed.
Joined network:
ID: 021.207.175
To rescan the networks, simply select the Rescan Networks
option and the logger will start the scanning process again.
If only one network was found the system will automatically
connect to that network without the user needing to select the
network manually.
Scan for network Scan for network Scan for network
Found 1 network Found 1 network Found 1 network
The Repeater display will return to the welcome message,
which consists of the Repeater name (editable via the
software) and the network status:
Ready - If connection to the DataNet software is established.
Software is down - If established connection to the Receiver
but the DataNet software is down (PC is off, software is not
open, etc.)
No Parent Signal – The parent unit, either the Receiver or
another Repeater, is not detected by the Repeater therefore it
is not transmitting its data to the network.
Fourier Systems Fourier Systems
Software down Software down
Scan complete Scan complete Scan complete
Fourier Systems Fourier Systems
Ready Ready
86
Joined to network: Joined to network: Joined to network:
ID: 021.207.175 ID: 021.207.175 ID: 021.207.175
Fourier Systems Fourier Systems
No Receiver No Receiver