Figure 50: Sms And Email Notification Setup - Fourier DataNet User Manual

Wireless intelligent logging network
Table of Contents

Advertisement

Figure 50: SMS and Email notification setup

5. Select the checkboxes according to the type of sensor
alarm for which notifications should be sent.
You may also select the following alarms:
a. Battery alarm: Notification will be sent for low battery
alarm when battery level is at or drops below 10%.
When the battery level goes above 10% again, when
unit is connected to AC power, another email
notification is sent stating the battery is charging.
b. Reception alarm: An Offline alarm notification will be
sent when there is no RF reception from a unit. When
the unit is back online, an Online notification is sent.
c. Normalized: Notification will be sent when the logger
return to normal levels having been in alarm.
6. Click the Contact button adjacent to each of the sensors
which have defined alarms. In the Select Contact dialog,
select the contact and/or group that will receive the
notification.
150

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DataNet and is the answer not in the manual?

Table of Contents