Fourier DataNet User Manual page 185

Note: Updating the DataNet software does not result in
any of the DataNet data files being deleted or affected in
any way.
5. Once the files have been successfully downloaded to the
DataNet installation directory on the PC, the software will
be updated automatically and a system message will
verify a successful update.
The firmware file, named DataNetFirmware.dfw, will also
be downloaded to the DataNet directory.
Note: The firmware file combines firmware for all DataNet
hardware units into one file. There is no need to download
separate files for each type of unit e.g. DNR900, DNL910,
DNL920, DNL808 and DNL810.
6. Another dialog will open prompting the user to run
DataNet following a successful update. Select the Run
DataNet checkbox and click OK. Otherwise, you may run
the software at a later time.
175