System Password; Figure 58: Printing A Table - Fourier DataNet User Manual

Figure 58: Printing a table

4.18.

System Password

Throughout the software you will be required to enter a
password to perform certain functions such as calibration or
firmware update.
Note: The default password is 1234.
To change the password:
1. In the Password dialog box, click Change Password to
open the Change Password dialog box.
2. Enter the current password in the Current Password text
box.
3. Enter the new password in the New Password text box.
4. Enter the new password a second time in the Confirm
New Password text box to confirm your new password.
5. Click OK.
Note: The password must include at least 4 characters and is
case sensitive.
170