Operating The Dnr900 In Receiver Mode; Turning On The Unit; Receiver Menus - Fourier DataNet User Manual

3. Once the device has joined the network you may
configure the Repeater name.
3.15. Operating the DNR900 in
Receiver Mode
This section explains how to operate the Receiver using the
menu options on the units' LCD screen, as how to change the
DNR900 unit type from Receiver to Repeater.

3.15.1. Turning on the Unit

In order to view the Receiver menu options, the unit must be
turned on by pressing the Scroll button
Ensure the unit is charged or connected to the AC adapter.
Once the unit is turned on it will display a series of status
messages, finishing with the welcome screen below:
Receiver
ID: 021.180.012

3.15.2. Receiver Menus

When the unit is selected to work as a Receiver (as opposed
to working as a Repeater) the following menus are displayed
on the unit.
Unit Name
When the unit is switched on the following screen is
displayed, indicating unit mode (Receiver) and the unique
network ID formed by this Receiver.
81
on the keypad.