Connecting The Receiver - Fourier DataNet User Manual

2.4.

Connecting the Receiver

1. Only once the DataNet software has been installed,
connect the DataNet Repeater unit (DNR900) to the
Fourier-supplied power adapter.
Note: Only use adapters provided by Fourier Systems. Use of
the wrong adapter could damage your DataNet units.
2. Turn on the unit by pressing the Scroll button
the front keypad. The unit will beep when turned on.
3. Verify that the unit is in Receiver mode by seeing the
following screen on the LCD:
Receiver
ID: 123.456.789
The ID will be unique to your Receiver network. If the unit
is in Repeater mode, switch it to Receiver mode. Go to
section 3.16 for more details.
4. Connect the mini-USB cable to the computer and to the
Receiver's mini-USB port. The DataNet Receiver icon
will immediately appear in the top left corner of the
Map View.
17
on