Figure 48: Adding A Contact - Fourier DataNet User Manual

Figure 48: Adding a contact

2. In this dialog you must first enter the contact name in the
Name field. That is the only mandatory field but if you
don't enter at least the phone number or Email then they
won't receive any alarm notifications.
The other fields in the dialog are as follows:
Title: Corporate position
Phone number: The number the DataNet software
will use to send the SMS notification.
Note: The phone number field supports the following
characters: 0-9, # , *, -, ( ), +
Email: The address the DataNet software will use to
send the Email notification.
Workday Start and End: You can define the hours in
which the contact will be eligible to receive the
notifications i.e. so they don't receive SMS or Email
while in the office, or vice versa.
147