Usb Communication Cable; Table 2: Data Logger Battery Life Scenarios - Fourier DataNet User Manual

The table below provides some example scenarios of
standard logger configurations and expected battery life.
Logger Sensor Setup
Model
•
DNL910
Internal
Temperature
•
4 x Thermocouple
DNL910 1 x PT-100
DNL808 1 x NTC 10 KΩ
•
DNL810
Internal
Temperature
•
Internal Humidity

Table 2: Data logger battery life scenarios

3.10.

USB Communication Cable

A mini USB communication cable is supplied as part of the
DataNet PC Suite. This cable connects the Receiver to the
DataNet PC workstation. When connected to the PC the
Receiver can communicate with the DataNet software and
manage the DataNet network.
The USB cable also powers the Receiver when connected to
the PC but it does not charge the internal battery.
Note: The USB driver is installed as part of the software
installation process. Without this driver the PC won't detect
the Receiver. To avoid compatibility problems do not connect
the Receiver to the PC before installing the USB driver.
Sample
Rate
15
minutes
15
minutes
15
minutes
15
minutes
61
Transmission
Rate
15 minutes
15 minutes
15 minutes
15 minutes
Battery
Life
Five
months
Six
months
10
months
10
months