Fourier DataNet User Manual page 31

found networks on the LCD (using the logger Scroll button)
and press the Enter button
network. In the example below, the network required is the
second network found. You can also rescan the networks by
pressing Enter on the Rescan networks screen, which is
reached by scrolling through all the found networks.
Network 1: Network 1: Network 1:
ID: 014.061.082 ID: 014.061.082 ID: 014.061.082
Note: If the logger did not detect a network, the unit will turn
off in order to conserve the battery.
3. Once you select the network, the logger will automatically
join that network and a new message will be displayed on
the LCD:
Joined network:
ID: 026.167.85
Note: If the message Join failed appears on the LCD, then
rescan for the network and try again. If the logger continually
fails to join, then form a new network on the Receiver.
4. The LCD will then indicate the following status message:
Fourier Systems
Ready
when you reach the required
Network 2: Network 2: Network 2:
ID: 026.167.85 ID: 026.167.85 ID: 026.167.85
21
Rescan networks Rescan networks