Firmware Update From The Map View Icon - Fourier DataNet User Manual

Note: You can quit the firmware update at any time by
unselecting the Update checkbox in the Update Center.
5. When the unit resets it will automatically rejoin the
network and will be in Stop mode. However the unit
configuration will still be saved. For loggers which have
completed firmware update, run the logger to start
recording data again.
5.2.3. Firmware Update from the Map
View Icon
Each DataNet unit, the data logger, Receiver and Repeater,
has the Update Firmware option in its Map View icon context
menu.
1. To perform a direct update from a specific unit, open the
context menu and select Update Firmware.
2. Enter the password in the Password dialog box.
3. A DataNet system message will prompt you to confirm the
update. Click Yes.
181