Fourier DataNet User Manual page 77

The logger display will return to the welcome message, which
consists of the logger name (editable via the software) and the
network status:
•
Ready - If connection to the DataNet software is
established.
•
Software is down - If established connection to the
Receiver but the DataNet software is down (PC is off,
software is not open, etc.)
•
No Parent Signal – The parent unit, either the Receiver
or Repeater, is not detected by the logger therefore the
logger is not transmitting its data to the network.
Fourier Systems Fourier Systems
Software down Software down
Scenario 2
When the system scans for networks and finds the last
network that it was connected to it will automatically connect
to the last known network.
Joined Network:
ID: 021.207.175
As in Scenario 1, the logger display will then return to the
welcome message displaying the unit name and status.
Fourier Systems Fourier Systems
Ready Ready
67
Fourier Systems Fourier Systems
No Receiver No Receiver