Pre-Setup Requirements; Launching The Software - Fourier DataNet User Manual

2.2.

Pre-setup Requirements

Prior to commencing with the DataNet implementation you
must have the following requirements in place:
PC
•
24/7 availability
•
Reliable AC power
•
Sufficient hard disk space to store loggers' data
•
One free USB port
DataNet devices
•
One DNR900 DataNet Receiver
•
At least one DataNet logger DNL910, DNL920, DNL910-
PA, DNL920-PA, or Mini DataNet logger DNL804,
DNL808 or DNL810
•
At least one DNR900 DataNet Repeater or DNR800 Mini
Repeater, depending on your environment
Mini-USB cable
The mini-USB cable connects the DNR900 Receiver to the
PC (and is supplied with the PC Suite software kit).
2.3.

Launching the Software

1. Install the DataNet software on the PC workstation. Refer
to section 4.1: Installing DataNet Software on page 94 for
more details.
15