Operating The Dnr900 In Repeater Mode; Turning On The Unit; Joining A Network - Fourier DataNet User Manual

Loading firmware
Progress: 55%
3.16. Operating the DNR900 in
Repeater Mode
This section explains how to operate the Repeater and
provides an overview of the menu options on the units' LCD
screen.
Refer to section 3.15.3 to learn how to switch the DNR900
from Receiver to Repeater mode.

3.16.1. Turning on the Unit

In order to view the Repeater menu options, the unit must be
turned on by pressing the Scroll button
Ensure the unit is connected to the AC adapter.
Once the unit is switched on it will emit a short beep and the
screen will display a welcome message:
Fourier Systems
Ready

3.16.2. Joining a Network

When a Repeater is powered on or reset, it will automatically
scan for a network after the welcome message has appeared.
There are three scenarios that can occur while scanning for a
network:
84
on the keypad.