Assembly Instructions For Flange Connections: (Fl61 And Fl62) - JLG 600SC Service And Maintenance Manual
Hide thumbs
Also See for 600SC:
- Operation and safety manual (120 pages) ,
- Operator's and safety manual (74 pages) ,
- Service and maintenance manual (270 pages)
Table of Contents
Advertisement
SECTION 5 - BASIC HYDRAULICS INFORMATION & SCHEMATICS
Assembly Instructions for Flange Connections:
(FL61 and FL62)
1. Make sure sealing surfaces are free of rust, splits,
scratches, dirt, foreign matter, or burrs.
2. See O-ring Installation (Replacement) for O-ring installa-
tion instructions.
3. Pre-lubricate the O-ring with Hydraulic Oil.
4. Position flange and clamp halves.
5. Place lock washers on bolt and bolt through clamp
halves.
6. Tighten all bolts by hand.
7. Torque bolts in diagonal sequence in two or more incre-
ments to the torque listed on Table 5-31, Flange Code
(FL61 & FL62) - Inch Fasteners and Table 5-32, Flange
Code (FL61 & FL62) - Metric Fasteners.
5-48
3121776
Advertisement
Table of Contents
