Turning On Power; To Operate The Power Supply From Ccu - Ikegami CCU-430 Operation Manual

4.3

Turning ON Power

The procedure for turning on the power is different depending on how to supply power to the camera. This section explains how to
supply power from the CCU or from the POWER connector (external power supply) to the camera. If the power supply needs to be

To operate the power supply from CCU

Before turning on this product, set the switches as follows.
Camera Camera POWER switch
CCU
Camera POWER switch
OCP (*)
(*) When the OCP-300 is used, the setting for the camera POWER switch on the CCU is not necessary.
■ To operate the power supply of the camera from the CCU
1
Turn ON the MAIN POWER switch on the CCU
rear side.
Caution:
power will not be supplied even if the POWER switch
on the front of CCU or the POWER switch of the
camera are turned on.
2
Set the [MAIN POWER] switch on the front of CCU to "ON".
Caution:
Menu operation, refer to "6.1 Basic operation of menu screen".
On. If the voltage does not match, switch Off the CCU and Main power, and contact Ikegami for service information regarding
the CCU voltage setting.
3
When the [Camera POWER] switch of the front of CCU is set to "ON", the power is supplied to the camera, and
the "CAM" POWER indicator lights up.
Switch
CCU
OFF
I
ON
MAIN POWER switch
AC POWER input
connector
UHK-430/CCU-430 1710 VER2 (E)
4.3 Turning ON Power
Switch Position
4
61