Using The Usb Memory; Inserting And Removing The Usb Memory - Ikegami CCU-430 Operation Manual

5.5 Using the USB Memory

5.5 Using the USB memory
The USB memory can be used to store/read the setting condition of the camera.
Caution:
responsibility for guaranteeing operation.

■ Inserting and removing the USB memory

There is a USB memory slot as shown in the illustration below on the bottom rear side of the camera main unit.
Open the dustproof cover and insert the USB memory in the USB memory slot.
Caution:
When inserting the USB memory in the slot, be sure that the USB memory is facing in the correct direction.
+12V
116
Camera Head Rear Side
SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI I/O 4
OFF OFF
USB
+48V +12V +48V
TRACKER
GbE TRK
MIC 1 MIC 2
UHK-430/CCU-430 1710 VER2 (E)
USB
REMOTE
DC-IN
11~17V
USB connector
The USB mark is
displayed when the
USB memory is
inserted and
recognized by the
camera.
USB