Ikegami CCU-430 Operation Manual page 109

[INTERCOM SET UP (1/3)]
[HEADSET MIC]
Menu Item
HEADSET SET MIC
― INTERCOM1
― MIC TYPE
― POWER
― GAIN
― FINE
― UNBAL
― INTERCOM2
― MIC TYPE
― POWER
― GAIN
― FINE
UNBAL
[INTERCOM MODE]
Menu Item
INTERCOM MODE
[INTERCOM FUNCTION]
Menu Item
INTERCOM FUNCTION
― AFTER VR MIX OFF
― INTERCOM1 VOL CTRL BOTH
― INTERCOM2 VOL CTRL
BOTH
― FRONT MIC ON SEL SW SEL
PGM FRONT VR
<< INTERCOM/AUDIO continues to the next page >>
Initial
Setting value
setting
ON ON, OFF
-60dB
20dB /-10dB / 0dB
0 -100 - 100
OFF OFF / ON
ON ON, OFF
0 -100 to 100
OFF OFF / ON
Initial
Setting value
setting
PRESET1 /PRESET2
Initial
Setting value
setting
ON / OFF
SW SEL / INC1 / INC2
UHK-430/CCU-430 1710 VER2 (E)
5.3 Menu Configuration and content
Description, Remarks
Selects carbon or dynamic for INTERCOM1 microphone.
Sets the ON/OFF of power supply to the carbon microphone.
(Fixed to "OFF" when Dynamic MIC is selected.)
Changes the microphone gain of INTERCOM1 by step.
Fine adjustment of the INTERCOM1 gain. The gain decreases about -10 dB with
"-100", and increases about +10 dB with "+100".
Selects the balance/unbalance mode.
Can select ON/OFF for dynamic microphone setting, and fixed to ON for the
carbon microphone.
Selects carbon or dynamic for INTERCOM2 microphone.
Sets the ON/OFF of power supply to the carbon microphone.
(Fixed to "OFF" when Dynamic MIC is selected.)
Changes the microphone gain of INTERCOM2 by step.
Fine adjustment of the INTERCOM2 gain. The gain decreases about -10 dB with
"-100", and increases about +10 dB with "+100".
Selects the balance/unbalance mode.
Can select ON/OFF for dynamic microphone setting, and fixed to ON for the
carbon microphone.
Description, Remarks
If the setting value is changed after being loaded, it becomes "USER".
Description, Remarks
adjusted individually.
and are in an exclusive relationship with INTERCOM2 VOL CTRL. (Fixed to
and are in an exclusive relationship with INTERCOM1 VOL CTRL. (Fixed to
The control of INTERCOM MIC button on the right side of the camera is linked
to the MIC operation of INTEROCM.
lines selected by INTERCOM selector switch.
(Operable from the MIC switch on the rear panel in all modes.)
5
91