Saving The Setting Status Of Camera To The Usb Memory - Ikegami CCU-430 Operation Manual

■ Saving the Setting Status of Camera to the USB Memory

1
Use the menu select knob in the "MAIN MENU"
to move the cursor to "FILE OPERATION".
Then press the SET button to display the "FILE
OPERATION" sub menu.
2
Select "USB MEMORY" and press the SET button.
3
Select the item from the SAVE FILE submenu that
you wish to save.
4
Select the items you wish to save, and then press
the SET button.
5
Use the menu select knob and the SET button to
set the file name with 8 characters.
position. Then, select the desired character and press
the SET button. When the SET button is pressed, it
moves to the next character.
6
When the file name is confirmed, the screen
returns to the "SAVE FILE" screen and "PUSH
SET → START" is displayed. Then, press the SET
button. If a file with the same name exists in the
USB memory, go to the Procedure "M1". To cancel
the saving process, turn the menu select knob
when "PUSHSET → START" is displayed. Then
select "CANCEL" and press the SET button.
UHK-430/CCU-430 1710 VER2 (E)
5.5 Using the USB Memory
continues to the next page
5
117